The Chromozone / IAL Chemistry / Specification checklist
Specification Pearson Edexcel International A Level Chemistry
Specification checklist
Every specification point, unit by unit, in Pearson's order. Tick one off when you have taught it and see at a glance what is still to come.
Your ticks are saved on this device, in this browser. In the full product they follow your teacher account, so they are there wherever you sign in.
Each line is our own short summary, not Pearson's wording; the number is Pearson's, so you can find the exact point in the specification on Pearson's IAL Chemistry page . Where we have a lesson for a point, you'll find a link next to it.
0 of 319 taught
319 specification points across Units 1, 2, 4 and 5, with the 16 core practicals marked where they are taught. Units 3 and 6 assess practical skills and have no points of their own.
Clear all ticks
Print
This browser is not letting the page save, so your ticks will be gone when you leave. Private browsing often does this.
Ticks need JavaScript to be saved and counted.
Unit 1 (WCH11) · IAS · 1 h 30 min · 80 marks
Structure, bonding and introduction to organic chemistry
0 of 78 taught
Topic 1 Formulae, equations and amount of substance
0 of 12 taught
1.1 Definitions of atom, element, ion, molecule, compound, empirical formula and molecular formula.
Lesson: Atoms, elements, molecules, compounds and ions Directed study: review for 1.1
1.2 The mole as the unit of amount of substance; calculations using the Avogadro constant, L, 6.02 x 10^23 per mole.
Lesson: The mole, molar mass and concentration Directed study: review for 1.2
1.3 Writing balanced equations, both full and ionic, with state symbols included for each reaction.
Lesson 1: Writing and balancing equations Lesson 2: Observing reactions: ionic equations and test-tube reactions Directed study: extend for 1.3 Directed study: extend for 1.3
1.4 Defining relative atomic mass (carbon-12 scale), relative molecular or formula mass, molar mass in g mol-1, and ppm in atmospheric gases.
Lesson: The mole, molar mass and concentration Directed study: review for 1.4
1.5 Calculating solution concentration in both mol dm-3 and g dm-3; titration calculations not needed yet.
Lesson: The mole, molar mass and concentration Directed study: review for 1.5
1.6 Using experimental results to work out empirical and molecular formulae.
Lesson: Determining formulae Directed study: review for 1.6
1.7 Using balanced equations with moles and molar mass to convert between reacting masses, in either direction.
Lesson: Reacting masses and limiting reactants Directed study: extend for 1.7
1.8 Using equations to find gas volumes and the reverse, via moles, molar gas volume and pV = nRT for gases and easily vaporised liquids.
Lesson: Volumes of gases Directed study: extend for 1.8
1.9 Calculating percentage yield and percentage atom economy (by mass) for lab and industrial processes from equations and experimental results.
Lesson: Percentage yield and atom economy Directed study: review for 1.9
1.10 Finding a formula or checking an equation by experiment, and evaluating the data collected.
Lesson: Determining formulae Directed study: review for 1.10
1.11 Core practical Measuring the molar volume of a gas by experiment.
Lesson: Core practical 1: the molar volume of a gas (double period) Directed study: extend for 1.11
1.12 Linking ionic and full equations, with state symbols, to test-tube observations covering displacement, typical acid behaviour and precipitation.
Lesson: Observing reactions: ionic equations and test-tube reactions Directed study: extend for 1.12
Topic 2 Atomic structure and the periodic table
0 of 18 taught
2.1 Atomic structure in terms of protons, neutrons and electrons.
Lesson: Atomic structure, isotopes and ions Directed study: review for 2.1
2.2 Relative masses and relative charges of a proton, a neutron and an electron.
Lesson: Atomic structure, isotopes and ions Directed study: review for 2.2
2.3 Meaning of atomic (proton) number and mass number.
Lesson: Atomic structure, isotopes and ions Directed study: review for 2.3
2.4 Using atomic number and mass number to count protons, neutrons and electrons in any atom or ion.
Lesson: Atomic structure, isotopes and ions Directed study: review for 2.4
2.5 Understanding what is meant by an isotope of an element.
Lesson: Atomic structure, isotopes and ions Directed study: review for 2.5
2.6 Mass spectrometer principles; interpreting spectra to find isotopic composition, relative atomic mass from abundances (and the reverse), molecular mass, and 2+ ions.
Lesson: Mass spectrometry Directed study: extend for 2.6
2.7 Predicting mass spectra for diatomic molecules such as chlorine, including relative peak heights, from isotope abundances.
Lesson: Mass spectrometry Directed study: extend for 2.7
2.8 Defining first, second and third ionisation energies, and recognising that every ionisation energy is endothermic.
Lesson: Ionisation energies Directed study: review for 2.8
2.9 Orbitals are regions of an atom holding a maximum of two electrons that spin in opposite directions.
Lesson: Orbitals and electronic configuration Directed study: extend for 2.9
2.10 How nuclear charge, shielding by inner electrons and the sub-shell being emptied influence ionisation energies.
Lesson: Ionisation energies Directed study: review for 2.10
2.11 Evidence for electronic structure: successive ionisation energies show quantum shells and group; first ionisation energies across elements show sub-shells.
Lesson 1: Ionisation energies Lesson 2: Ionisation energies and orbitals Directed study: review for 2.11 Directed study: extend for 2.11
2.12 Describing the shapes of s orbitals and p orbitals.
Lesson: Orbitals and electronic configuration Directed study: extend for 2.12
2.13 Electrons occupy each orbital in a sub-shell singly before any pairing, and paired electrons have opposite spins.
Lesson: Orbitals and electronic configuration Directed study: extend for 2.13
2.14 Predicting electron configurations of atoms and ions from hydrogen to krypton, in s, p, d notation and electrons-in-boxes form.
Lesson: Orbitals and electronic configuration Directed study: extend for 2.14
2.15 An element's chemical behaviour is determined by how its electrons are arranged.
Lesson: Periodicity Directed study: review for 2.15
2.16 Periodic Table blocks (s, p, d) and how many electrons each sub-shell type holds in the first four shells.
Lesson: Orbitals and electronic configuration Directed study: extend for 2.16
2.17 Plotting graphs of data for the first 36 elements, including log of first ionisation energy, to explain what a periodic property is.
Lesson: Ionisation energies and orbitals Directed study: extend for 2.17
2.18 Period 2 and 3 melting and boiling trends via structure and bonding, ionisation energy patterns across periods, and first ionisation energy falling down groups.
Lesson 1: Ionisation energies and orbitals Lesson 2: Periodicity Directed study: extend for 2.18 Directed study: review for 2.18
Topic 3 Bonding and structure
0 of 22 taught
3.1 Evidence that ions exist: properties of ionic substances, electron density maps and ion migration.
Lesson: Evidence for ions Directed study: extend for 3.1
3.2 Describing how ions form by electron loss or gain.
Lesson: Ionic bonding Directed study: review for 3.2
3.3 Drawing diagrams with dots and crosses to show the outer electrons of cations and of anions.
Lesson: Ionic bonding Directed study: review for 3.3
3.4 Ionic crystals are described as extended three-dimensional lattices built from ions.
Lesson: Ionic bonding Directed study: review for 3.4
3.5 Ionic bonding arises from strong overall electrostatic attraction between oppositely charged ions.
Lesson: Ionic bonding Directed study: review for 3.5
3.6 Effect of the size and the charge of ions on how strong ionic bonding is.
Lesson: Ionic radii Directed study: review for 3.6
3.7 Explaining ionic radius trends down a group and across the isoelectronic series from N3- to Al3+.
Lesson: Ionic radii Directed study: review for 3.7
3.8 Understand what polarisation means when applied to ions.
Lesson: Polarisation Directed study: extend for 3.8
3.9 Cation polarising power depends on size and charge; anion polarisability also depends on its size and charge.
Lesson: Polarisation Directed study: extend for 3.9
3.10 Covalent bonding is strong attraction of two nuclei towards their shared electron pair, shown by giant atomic structure properties and electron density maps.
Lesson 1: Covalent bonding and dot-and-cross diagrams Lesson 2: Evidence for covalent bonding Directed study: extend for 3.10 Directed study: review for 3.10
3.11 Dot-and-cross diagrams for covalent species: molecules with single, double or triple bonds, and dative bonds as in Al2Cl6 and the ammonium ion.
Lesson 1: Covalent bonding and dot-and-cross diagrams Lesson 2: Dative covalent bonds Directed study: extend for 3.11 Directed study: review for 3.11
3.12 Giant carbon lattices (graphite, diamond, graphene), their structures and the uses of each.
Lesson: Giant covalent structures: diamond, graphite and graphene Directed study: extend for 3.12
3.13 Meaning of electronegativity for an atom within a covalent bond.
Lesson: Electronegativity and polarity Directed study: extend for 3.13
3.14 Ionic and covalent bonding as ends of a continuum, explained by electronegativity differences and resulting bond polarity.
Lesson: Electronegativity and polarity Directed study: extend for 3.14
3.15 Telling polar bonds from polar molecules, and predicting whether a given molecule is polar.
Lesson: Electronegativity and polarity Directed study: extend for 3.15
3.16 Principles of electron-pair repulsion theory for interpreting and forecasting how simple molecules and ions are shaped.
Lesson: Shapes and bond angles (lesson 1 of 2) Directed study: extend for 3.16
3.17 Understand what is meant by bond length and by bond angle.
Lesson: Shapes and bond angles (lesson 1 of 2) Directed study: extend for 3.17
3.18 Explaining shapes and bond angles of BeCl2, BCl3, CH4, NH3, NH4+, H2O, CO2, gaseous PCl5, SF6 and C2H4.
Lesson 1: Shapes and bond angles (lesson 1 of 2) Lesson 2: Shapes and bond angles (lesson 2 of 2) Directed study: extend for 3.18 Directed study: review for 3.18
3.19 Applying electron-pair repulsion to predict shapes and angles for species analogous to the examples in 3.18.
Lesson: Shapes and bond angles (lesson 2 of 2) Directed study: review for 3.19
3.20 Metals are giant lattices of positive ions with a sea of delocalised electrons.
Lesson: Metallic bonding Directed study: review for 3.20
3.21 Metallic bonding results from powerful electrostatic pull between the positive metal ions and delocalised electrons.
Lesson: Metallic bonding Directed study: review for 3.21
3.22 Using the metallic bonding models to explain simple metal properties such as conductivity and high melting temperatures.
Lesson: Metallic bonding Directed study: review for 3.22
Topic 4 Introductory organic chemistry and alkanes
0 of 18 taught
4.1 Understand how a hazard differs from a risk.
Lesson: Hazards and risks Directed study: review for 4.1
4.2 Hazards of organic compounds, and why risk assessments are needed for potentially dangerous materials.
Lesson: Hazards and risks Directed study: review for 4.2
4.3 Ways to lower risk and work safely: smaller scale, hazard-specific precautions, or a less hazardous alternative method.
Lesson: Hazards and risks Directed study: review for 4.3
4.4 Understanding homologous series and functional group as organic concepts.
Lesson: Homologous series and naming Directed study: extend for 4.4
4.5 Applying IUPAC rules to name compounds and draw them as structural, displayed and skeletal formulae; prefixes up to C10.
Lesson: Homologous series and naming Directed study: extend for 4.5
4.6 Sorting reactions into types: addition, substitution, oxidation, reduction and polymerisation.
Lesson: Organic reactions and bond breaking Directed study: review for 4.6
4.7 Bond breaking may be homolytic, giving free radicals, or heterolytic, giving ions.
Lesson: Organic reactions and bond breaking Directed study: review for 4.7
4.8 Know the definitions of free radical and of electrophile.
Lesson: Organic reactions and bond breaking Directed study: review for 4.8
4.9 General formula of alkanes and cycloalkanes; as hydrocarbons they contain carbon and hydrogen only, and are saturated, with single bonds only.
Lesson: Alkanes and structural isomers Directed study: extend for 4.9
4.10 Meaning of structural isomerism, and drawing structural isomers from a molecular formula.
Lesson: Alkanes and structural isomers Directed study: extend for 4.10
4.11 Drawing and naming structural isomers of alkanes and cycloalkanes with six carbons or fewer.
Lesson: Alkanes and structural isomers Directed study: extend for 4.11
4.12 Alkanes as fuels from crude oil by fractional distillation, cracking and reforming, with equations for these processes.
Lesson: Crude oil, cracking and reforming Directed study: extend for 4.12
4.13 Pollutants from burning alkane fuels: carbon monoxide, nitrogen and sulfur oxides, soot particles and unburnt hydrocarbons.
Lesson: Combustion and pollutants Directed study: review for 4.13
4.14 Problems from combustion pollutants: why carbon monoxide is toxic, and acidity of nitrogen and sulfur oxides.
Lesson: Combustion and pollutants Directed study: review for 4.14
4.15 Why alternative fuels are developed, considering sustainability, lower emissions and CO2 linked to climate change.
Lesson: Alternative fuels Directed study: extend for 4.15
4.16 Applying carbon neutrality to fuels such as petrol, bioethanol and hydrogen.
Lesson: Alternative fuels Directed study: extend for 4.16
4.17 Alkane reactions with air (combustion) and with halogens.
Lesson 1: Combustion and pollutants Lesson 2: Free radical substitution Directed study: review for 4.17 Directed study: review for 4.17
4.18 Free radical substitution of alkanes by halogens: initiation with half-arrows, propagation, termination, and limited synthetic value due to multiple substitution.
Lesson: Free radical substitution Directed study: review for 4.18
Topic 5 Alkenes
0 of 8 taught
5.1 General formula of alkenes; alkenes and cycloalkenes are unsaturated, with a C=C made of a sigma and a pi bond.
Lesson: Alkenes, cycloalkenes, and σ and π bonds (lesson 1 of 2) Directed study: review for 5.1
5.2 Explaining geometric isomerism by restricted rotation about C=C and the groups attached to each carbon.
Lesson: Geometric isomers and E/Z naming (lesson 2 of 2) Directed study: extend for 5.2
5.3 The E-Z naming system, and why it is required when cis-trans labels cannot be used.
Lesson: Geometric isomers and E/Z naming (lesson 2 of 2) Directed study: extend for 5.3
5.4 Alkene reactions: hydrogenation with nickel, halogen addition, hydrogen halide addition, steam hydration with acid catalyst to alcohols, and diol formation with acidified manganate(VII).
Lesson: Reactions of alkenes Directed study: extend for 5.4
5.5 Bromine or bromine water as the test for a carbon-carbon double bond.
Lesson: Electrophilic addition: the bromine test and mechanisms Directed study: extend for 5.5
5.6 Electrophilic addition mechanisms with curly arrows: bromine and HBr with ethene, HBr with propene, including carbocation stability.
Lesson: Electrophilic addition: the bromine test and mechanisms Directed study: extend for 5.6
5.7 Addition polymerisation of alkenes: drawing the repeat unit from the monomer and the reverse.
Lesson: Addition polymers and polymer waste Directed study: review for 5.7
5.8 Reducing polymer disposal problems through biodegradable polymers and removing toxic gases from incineration.
Lesson: Addition polymers and polymer waste Directed study: review for 5.8
Unit 2 (WCH12) · IAS · 1 h 30 min · 80 marks
Energetics, group chemistry, halogenoalkanes and alcohols
0 of 79 taught
Topic 6 Energetics
0 of 11 taught
6.1 Enthalpy change is heat exchanged at constant pressure; standard conditions mean 100 kPa and a stated temperature, usually 298 K.
Lesson 1: Enthalpy changes (lesson 1 of 2) Lesson 2: Standard enthalpy changes (lesson 2 of 2) Directed study: review for 6.1 Directed study: extend for 6.1
6.2 Sign convention: exothermic reactions have negative enthalpy changes, endothermic ones positive.
Lesson: Enthalpy changes (lesson 1 of 2) Directed study: review for 6.2
6.3 Drawing and interpreting enthalpy level diagrams for exothermic and endothermic changes.
Lesson: Enthalpy changes (lesson 1 of 2) Directed study: review for 6.3
6.4 Defining standard enthalpy changes of reaction, formation, combustion, neutralisation and atomisation.
Lesson: Standard enthalpy changes (lesson 2 of 2) Directed study: extend for 6.4
6.5 Calculating energy transferred (mass x specific heat capacity x temperature rise) and enthalpy change in kJ mol-1, for insulated mixing and calorimeter combustion.
Lesson: Energy transferred and calorimetry Directed study: extend for 6.5
6.6 Hess's Law: building enthalpy cycles and calculating enthalpy changes from supplied, tabulated or experimental data.
Lesson: Hess's law and enthalpy cycles Directed study: review for 6.6
6.7 Core practical Finding an enthalpy change of reaction using Hess's Law.
Lesson: Core practical 2: an enthalpy change by Hess's law (lesson 1 of 2) Directed study: extend for 6.7
6.8 Evaluating enthalpy experiments: errors, uncertainty and assumptions, drawing graphs with cooling curve corrections, for insulated mixing and spirit burner combustion.
Lesson: Evaluating enthalpy experiments (lesson 2 of 2) Directed study: extend for 6.8
6.9 Bond enthalpy and mean bond enthalpy; using them to calculate enthalpy changes and knowing the method's limitations.
Lesson: Bond enthalpies Directed study: extend for 6.9
6.10 Calculating a mean bond enthalpy starting from a measured enthalpy change of reaction.
Lesson: Bond enthalpies Directed study: extend for 6.10
6.11 Bond enthalpies hint at which bond breaks first, how easily, and so how fast a reaction proceeds at room temperature.
Lesson: Bond enthalpies Directed study: extend for 6.11
Topic 7 Intermolecular forces
0 of 6 taught
Topic 8 Redox chemistry and Groups 1, 2 and 7
0 of 28 taught
8.1 Meaning of oxidation number and the rules for assigning it.
8.2 Calculating oxidation numbers for elements within compounds and ions, peroxides and metal hydrides among them.
8.3 Showing an element's oxidation number with a Roman numeral in a compound or ion.
8.4 Writing formulae when the oxidation numbers are given.
8.5 Oxidation and reduction as electron transfer and oxidation number change, applied to reactions of s-block and p-block elements.
8.6 Oxidising agents gain electrons; reducing agents lose electrons.
8.7 Disproportionation means one element in one species is oxidised and reduced simultaneously.
8.8 Using oxidation numbers to classify reactions as redox or disproportionation.
8.9 Metals generally form positive ions by losing electrons (oxidation number rises); non-metals form negative ions by gaining electrons (number falls).
8.10 Writing ionic half-equations and combining them into full ionic equations.
8.11 Reasons for the ionisation energy trend going down Groups 1 and 2.
8.12 Reasons for increasing reactivity down Group 1 (Li to K) and Group 2 (Mg to Ba).
8.13 Reactions of Group 1 (Li to K) and Group 2 (Mg to Ba) elements with oxygen, chlorine and water.
8.14 Reactions of Group 1 and 2 oxides and hydroxides with dilute acid, and the oxides with water.
8.15 Solubility trends of Group 2 hydroxides and sulfates.
8.16 Explaining thermal stability trends of Group 1 and 2 nitrates and carbonates using cation size and charge.
8.17 Group 1 and 2 compounds give characteristic flame colours through electron transitions; the colours themselves must be recalled.
8.18 Experiments on thermal decomposition of Group 1 and 2 nitrates and carbonates (gas tests, NO2 colour and acidity) and on flame colours.
8.19 Tests with ionic equations: carbonate and hydrogencarbonate with acid and limewater, sulfate with acidified barium chloride, ammonium with warm sodium hydroxide.
8.20 Calculating solution concentrations, in mol dm-3 and g dm-3, including simple acid-base titrations with methyl orange and phenolphthalein.
8.21 Core practical Determining the concentration of a hydrochloric acid solution by titration.
8.22 Cutting down measurement uncertainty in volumetric work and estimating the final result's overall uncertainty.
8.23 Core practical Preparing a solid acid standard solution, then titrating sodium hydroxide solution to find its concentration.
8.24 Explaining Group 7 trends: melting and boiling points, state at room temperature, electronegativity and reactivity down the group.
8.25 Group 7 reactivity trend through redox reactions of Cl2, Br2 and I2 with aqueous halides; element colours in standard state, water and non-polar solvent.
8.26 Halogen reactions via oxidation numbers: oxidising Group 1 and 2 metals, chlorine disproportionating in water (water treatment), cold dilute NaOH (bleach), hot alkali, analogues.
8.27 Halide reactions: solid Group 1 halides with concentrated sulfuric acid (reducing trend), silver nitrate precipitates and ammonia solubility, hydrogen halides with ammonia and water.
8.28 Using halogen trends to predict the chemistry of fluorine, astatine and their compounds.
Topic 9 Introduction to kinetics and equilibria
0 of 11 taught
Topic 10 Organic chemistry: halogenoalkanes, alcohols and spectra
0 of 23 taught
10.1 Classifying reactions, Unit 1 ones included, as addition, elimination, substitution, oxidation, reduction, hydrolysis or polymerisation.
10.2 Understanding the idea of a reaction mechanism in organic chemistry.
10.3 Heterolytic bond fission produces species called electrophiles or nucleophiles.
10.4 Know the definition of a nucleophile, in organic chemistry.
10.5 How bond polarity determines the type of mechanism a compound follows.
10.6 Naming halogenoalkanes and drawing structural, displayed and skeletal formulae.
10.7 Telling primary, secondary and tertiary halogenoalkanes apart from one another.
10.8 Halogenoalkane reactions: aqueous alkali to alcohols, ethanolic KOH elimination to alkenes, silver nitrate in ethanol, ammonia to amines, cyanide to nitriles (longer carbon chain).
10.9 Mechanisms of nucleophilic substitution of primary halogenoalkanes with aqueous potassium hydroxide and with ammonia; SN1 and SN2 come in Unit 4.
10.10 Using data to compare hydrolysis rates of primary, secondary and tertiary isomers, and of chloro-, bromo- and iodoalkanes with silver nitrate in ethanol.
10.11 Core practical Investigating hydrolysis rates of some halogenoalkanes.
10.12 Reactivity trend for primary, secondary and tertiary halogenoalkanes.
10.13 Explaining chloro-, bromo- and iodoalkane reactivity trend using bond enthalpy.
10.14 Core practical Making a chloroalkane from 2-methylpropan-2-ol and concentrated hydrochloric acid.
10.15 Naming alcohols and drawing structural, displayed and skeletal formulae.
10.16 Telling primary, secondary and tertiary alcohols apart from one another.
10.17 Alcohol reactions: burning; PCl5 (also an -OH test), 50% sulfuric acid with KBr, red phosphorus with iodine; concentrated phosphoric acid elimination. No mechanisms needed.
10.18 Acidified dichromate(VI) oxidation: primary alcohols to aldehydes (distil) or acids (reflux), secondary alcohols to ketones, with Benedict's, Fehling's and carbonate tests; [O] in equations.
10.19 Techniques for making and purifying a liquid organic compound: reflux, solvent extraction with separating funnel, distillation, drying with anhydrous salt, boiling point measurement.
10.20 Core practical Oxidising propan-1-ol to propanal and propanoic acid.
10.21 Using mass spectra data, molecular ion m/z and fragments to suggest structures for simple organic molecules.
10.22 Using infrared spectra or wavenumber data to find functional groups: C-H, C=C, O-H, C=O, C-X and N-H absorptions.
10.23 Core practical Analysing a set of inorganic and organic unknowns.
Unit 4 (WCH14) · IA2 · 1 h 45 min · 90 marks
Rates, equilibria and further organic chemistry
0 of 87 taught
Topic 11 Kinetics
0 of 13 taught
11.1 Terms: reaction rate, rate equation (orders 0, 1, 2), order, overall order, rate constant, half-life, rate-determining step, activation energy, heterogeneous and homogeneous catalyst.
11.2 Finding half-life from a graph; constant half-life identifies a first-order reaction.
11.3 Choosing and justifying a technique for rate data: titration, colorimetry, mass change, gas volume or another suitable method.
11.4 Investigating rates by initial-rate experiments (a clock reaction is acceptable) or continuous monitoring to plot concentration-time or volume-time graphs.
11.5 Deducing whether order is 0, 1 or 2 from concentration-time graphs, rate-concentration graphs or initial-rate data.
11.6 Iodination of propanone with acid catalyst: getting orders for reactants and H+, inferring rate-determining step species, and suggesting a mechanism.
11.7 Working out the rate-determining step given a rate equation, and going the other way.
11.8 Deducing a mechanism from the rate equation together with the stoichiometric equation.
11.9 Rate equations for halogenoalkane hydrolysis give evidence for SN1 (tertiary) and SN2 (primary) mechanisms.
11.10 Finding activation energy from experimental data by calculation and graphs; the Arrhenius equation is supplied if needed.
11.11 Solid heterogeneous catalysts in gas-phase industrial reactions work by providing a surface for reaction.
11.12 Core practical Following the iodine-propanone reaction by titration, and investigating an iodine clock reaction (Harcourt-Esson).
11.13 Core practical Determining a reaction's activation energy experimentally.
Topic 12 Entropy and energetics
0 of 19 taught
12.1 Endothermic reactions can happen spontaneously at room temperature, so enthalpy change alone does not decide whether a reaction occurs.
12.2 Entropy measures disorder, arising from molecules and energy quanta spreading out randomly among particles.
12.3 Entropy rises with temperature and from solid to liquid to gas; perfect crystals at absolute zero have zero entropy.
12.4 Natural change goes towards higher total entropy, such as gases spreading through a room.
12.5 Reasons for entropy change in state changes, dissolving an ionic solid, and reactions where the number of moles changes.
12.6 Total entropy change equals system change plus surroundings change: delta S total = delta S system + delta S surroundings.
12.7 Calculating the system entropy change from the entropies of reactants and products.
12.8 Calculating the surroundings entropy change as minus delta H over T, and hence delta S total.
12.9 Feasibility depends on the system and surroundings entropy balance and on temperature; calculating the feasibility temperature (delta G optional).
12.10 A reaction can proceed provided delta S total is positive, even when one component is negative.
12.11 Distinguishing thermodynamic stability from kinetic stability of substances.
12.12 Defining standard enthalpy of atomisation, electron affinity and lattice energy (exothermic, forming one mole of solid from gaseous ions).
12.13 Constructing Born-Haber cycles and doing the related calculations.
12.14 Comparing experimental (Born-Haber) and theoretical lattice energies shows how much covalent character a compound has.
12.15 Anion polarisation by cations adds covalency to ionic bonds, shown by Born-Haber evidence.
12.16 Defining enthalpy change of solution and enthalpy change of ion hydration.
12.17 Using energy cycles and level diagrams to find an ionic compound's enthalpy of solution from hydration and lattice energies.
12.18 How ionic charge and radius affect enthalpy of hydration and lattice energy.
12.19 Using entropy and solution enthalpy to predict ionic solubility and discuss Unit 2 solubility trends.
Topic 13 Chemical equilibria
0 of 9 taught
Topic 14 Acid-base equilibria
0 of 23 taught
14.1 Brønsted-Lowry acids donate protons and bases accept them; acid-base reactions involve proton transfer.
14.2 Be able to pick out Brønsted-Lowry conjugate acid-base pairs in reactions.
14.3 Be able to give a definition of the term pH.
14.4 Calculating pH when given the concentration of hydrogen ions.
14.5 Finding [H+] in mol dm-3 from pH using [H+] = 10^-pH.
14.6 Strong and weak acids differ in their degree of dissociation.
14.7 Calculating the pH value for a solution of strong acid.
14.8 Writing the acid dissociation constant, Ka, expression for a weak acid.
14.9 Calculating weak acid pH from Ka or pKa with suitable assumptions; no quadratics required.
14.10 Be able to give a definition of the ionic product of water, Kw.
14.11 Calculating strong base pH from its concentration, via Kw or pKw.
14.12 Be able to give definitions for pKa and pKw.
14.13 Analysing pH data: equimolar strong and weak acids, bases and salts, and strong against weak acid after 10, 100 and 1000-fold dilution.
14.14 Calculating Ka of a weak acid using the measured acidity of a solution made with a known acid mass.
14.15 Drawing and interpreting titration curves for every pairing of strong or weak monoprotic and diprotic acids with bases.
14.16 Selecting a suitable titration indicator using the curve and relevant data.
14.17 Understand what is meant by a buffer solution.
14.18 Understand how a buffer solution actually works, in practice.
14.19 Calculating the acidity of a buffer, as pH, from data supplied.
14.20 Calculating concentrations needed to make a buffer of a given pH.
14.21 Using titration curves (weak acid with strong base, or the reverse) to show buffering and find Ka from the half-neutralisation or equivalence pH.
14.22 Importance of buffers in biology: cells and blood (H2CO3/HCO3-), and in foods resisting pH change from microbial activity.
14.23 Core practical Finding the Ka value of a weak acid experimentally.
Topic 15 Organic chemistry: carbonyls, carboxylic acids and chirality
0 of 23 taught
15.1 Optical isomerism results from chirality, in molecules having one chiral centre.
Lesson: Chirality and enantiomers Directed study: review for 15.1
15.2 Optical isomers (enantiomers) have an asymmetric carbon and are non-superimposable mirror images; drawing them in 3D.
Lesson: Chirality and enantiomers Directed study: review for 15.2
15.3 Optical activity: one optical isomer rotates the plane of plane-polarised monochromatic light, for molecules with one chiral centre.
Lesson: Optical activity Directed study: extend for 15.3
15.4 Understand what is meant by a racemic mixture.
Lesson: Optical activity Directed study: extend for 15.4
15.5 Optical activity of starting materials and of products is evidence for SN1, SN2 and carbonyl addition mechanisms.
Lesson: Optical activity and reaction mechanisms Directed study: review for 15.5
15.6 Naming aldehydes and ketones and drawing structural, displayed and skeletal formulae.
Lesson: Carbonyl compounds and their physical properties Directed study: extend for 15.6
15.7 Aldehydes and ketones cannot hydrogen bond to themselves, affecting physical properties, but can bond to water, affecting solubility.
Lesson: Carbonyl compounds and their physical properties Directed study: extend for 15.7
15.8 Carbonyl reactions: Fehling's, Benedict's, Tollens' and acidified dichromate; LiAlH4; HCN with KCN (nucleophilic addition mechanism); 2,4-DNPH test and derivative melting points; iodoform test.
Lesson 1: Redox reactions of carbonyl compounds Lesson 2: Nucleophilic addition to carbonyl compounds Directed study: extend for 15.8 Directed study: review for 15.8
15.9 Naming carboxylic acids and drawing structural, displayed and skeletal formulae.
Lesson: Carboxylic acids and their physical properties Directed study: extend for 15.9
15.10 Hydrogen bonding affects carboxylic acids' boiling points and solubility.
Lesson: Carboxylic acids and their physical properties Directed study: extend for 15.10
15.11 Making carboxylic acids by oxidising alcohols or aldehydes, or by hydrolysing nitriles.
Lesson: Preparing and reacting carboxylic acids Directed study: review for 15.11
15.12 Carboxylic acid reactions with LiAlH4 in dry ether, bases to give salts, PCl5, and alcohols with an acid catalyst.
Lesson: Preparing and reacting carboxylic acids Directed study: review for 15.12
15.13 Naming acyl chlorides and esters, and drawing structural, displayed and skeletal formulae for them.
Lesson 1: Acyl chlorides Lesson 2: Esters Directed study: extend for 15.13 Directed study: extend for 15.13
15.14 Acyl chloride reactions with water, alcohols, concentrated ammonia and amines.
Lesson: Acyl chlorides Directed study: extend for 15.14
15.15 Hydrolysis of esters under acidic and alkaline conditions.
Lesson: Esters Directed study: extend for 15.15
15.16 Polyesters such as terylene form by condensation polymerisation.
Lesson: Polyesters Directed study: review for 15.16
15.17 Using accurate mass data to suggest structures, and calculating accurate relative molecular mass from atomic masses given to 4 decimal places.
Lesson: Mass spectra and accurate relative molecular mass Directed study: review for 15.17
15.18 13C NMR shows where carbon-13 atoms are located in a molecule.
Lesson: NMR spectroscopy and carbon-13 NMR (lesson 1 of 2) Directed study: review for 15.18
15.19 Using 13C NMR chemical shifts to predict carbon environments, and explaining the number of peaks by distinct carbon environments.
Lesson: NMR spectroscopy and carbon-13 NMR (lesson 1 of 2) Directed study: review for 15.19
15.20 Low and high resolution proton NMR: shift environments, peak area ratios, splitting through the n+1 rule to propose structures, and predicting shifts and splitting.
Lesson: Proton NMR spectroscopy (lesson 2 of 2) Directed study: extend for 15.20
15.21 Chromatography separates a mixture's components with the help of a mobile phase moving over a stationary phase.
Lesson: Simple chromatography Directed study: extend for 15.21
15.22 Calculating Rf from one-way paper and TLC chromatograms, and explaining differing Rf values.
Lesson: Simple chromatography Directed study: extend for 15.22
15.23 HPLC and GC are column chromatography separating by retention time, and can be linked to mass spectrometry in forensics and sports drug testing.
Lesson 1: HPLC and gas chromatography Lesson 2: Chromatography with mass spectrometry Directed study: extend for 15.23 Directed study: extend for 15.23
Unit 5 (WCH15) · IA2 · 1 h 45 min · 90 marks
Transition metals and organic nitrogen chemistry
0 of 75 taught
Topic 16 Redox equilibria
0 of 19 taught
Topic 17 Transition metals and their chemistry
0 of 33 taught
17.1 Transition metals are d-block elements forming at least one stable ion with partly filled d-orbitals.
17.2 Deducing electron configurations of Period 4 d-block atoms and ions (Sc to Zn) from atomic number and charge.
17.3 Understand why transition metals have several possible oxidation numbers.
17.4 Know the meaning of the term ligand in complexes.
17.5 Dative covalent bonding is involved when complex ions form.
17.6 A complex ion consists of one central metal ion with ligands around it.
17.7 Aqueous transition metal ions usually show colour in solution.
17.8 Colour of aqueous and other complex ions arises from ligand-induced splitting of d-orbital energy levels.
17.9 Why some aqueous and complex ions are colourless.
17.10 Understand what coordination number means for a complex.
17.11 Colour changes can come from a change in oxidation number, ligand or coordination number.
17.12 H2O, OH- and NH3 each bond to the metal as monodentate ligands.
17.13 Why six-coordinate complexes are octahedral, for example with H2O, OH- and NH3 ligands.
17.14 Transition metal ions form tetrahedral complexes with comparatively large ligands such as Cl-.
17.15 Square planar complexes exist; cis-platin is one, used in cancer treatment as the pure cis isomer, not mixed with trans.
17.16 Meaning of bidentate and hexadentate ligands, with examples NH2CH2CH2NH2 and EDTA4-.
17.17 Haemoglobin is an iron(II) complex with a polydentate ligand; carbon monoxide displaces bound oxygen by ligand exchange; haem structure is not assessed.
17.18 Know the colours of vanadium compounds in oxidation states +5, +4, +3 and +2.
17.19 Redox reactions interconverting vanadium's +5, +4, +3 and +2 states, explained using E values.
17.20 Using E values: zinc in acid reduces dichromate(VI) to Cr3+ and Cr2+; hydrogen peroxide in alkali oxidises Cr3+ to it, then acidify.
17.21 Dichromate(VI) converts to chromate(VI) through the equilibrium Cr2O7 2- + H2O <=> 2CrO4 2- + 2H+.
17.22 Observations and equations for Cr3+, Mn2+, Fe2+, Fe3+, Co2+, Ni2+, Cu2+ and Zn2+ with aqueous NaOH and ammonia, including excess.
17.23 Ionic equations for amphoteric behaviour, deprotonation and ligand exchange in the 17.22 reactions.
17.24 Ligand exchange with colour change forming [Cu(NH3)4(H2O)2]2+ (via Cu(OH)2(H2O)4), [CuCl4]2- and [CoCl4]2-.
17.25 Replacing monodentate ligands with bidentate or hexadentate ones gives more stable complexes because system entropy increases.
17.26 Transition metals and compounds can be heterogeneous or homogeneous catalysts.
17.27 Heterogeneous catalysts are in a separate phase from the reactants, with the reaction taking place on the catalyst surface.
17.28 How V2O5 catalyses the contact process, explained by oxidation number changes.
17.29 Catalytic converters cut CO and NO emissions: adsorption weakens bonds and reaction occurs, then CO2 and N2 desorb.
17.30 A homogeneous catalyst shares the reactants' phase, and catalysis proceeds through an intermediate.
17.31 Role of Fe2+ ions as catalyst for the I- and S2O8 2- reaction.
17.32 Mn2+ ions autocatalyse the reaction between MnO4- and C2O4 2- ions.
17.33 Core practical Preparing a transition metal complex in the laboratory.
Topic 18 Organic chemistry: arenes
0 of 6 taught
Topic 19 Organic nitrogen compounds: amines, amides, amino acids and proteins
0 of 12 taught
19.1 Naming amides, amines and amino acids and drawing their structural, displayed and skeletal formulae.
19.2 Butylamine and phenylamine reactions with water (alkaline solution), acids (salts), halogenoalkanes, ethanoyl chloride and copper(II) ions (complex).
19.3 Amines mix with water through hydrogen bonding; why ammonia, aliphatic amines and aromatic amines differ in basicity.
19.4 Making primary aliphatic amines from halogenoalkanes or by reducing nitriles: reagents and general conditions.
19.5 Making aromatic amines by reducing aromatic nitro compounds with tin and concentrated HCl.
19.6 Aromatic amines react with nitrous acid to give benzenediazonium ions, then couple with phenol to make a dye.
19.7 Amides can be made by reacting acyl chlorides.
19.8 Condensation polymerisation giving polyamides (nylon, proteins) and addition polymerisation including poly(propenamide) and poly(ethenol).
19.9 Drawing repeat unit formulae for the 19.8 polymers.
19.10 Hydrogen bonding explains polyamide properties and poly(ethenol) solubility, as in dissolving laundry bags and liquitabs.
19.11 Experiments on amino acids: acidity, basicity and zwitterions; effect on plane-polarised light; peptide bond formation by condensation.
19.12 Core practical Analysing a set of inorganic and organic unknowns.
Topic 20 Organic synthesis
0 of 5 taught
20.1 Deducing empirical, molecular and structural formulae from combustion analysis, percentage composition, functional group tests, IR, mass spectra and 13C and proton NMR.
20.2 Extending carbon chains using magnesium-derived Grignard reagents, which react with CO2 and with aldehydes or ketones in dry ether.
20.3 Solving organic problems: predicting unfamiliar compounds' properties, planning schemes of at most four steps, choosing procedures, and choosing risk controls from hazard data.
20.4 Core practical Preparing a sample of aspirin in the laboratory.
20.5 Techniques for making and purifying organic compounds: reflux, washing (water, sodium carbonate), solvent extraction, recrystallisation, drying, distillation, steam distillation, melting and boiling point measurement.
The Chromozone is independent and is not affiliated with, endorsed by or sponsored by Pearson Education Ltd. Pearson Edexcel is named here only to describe the qualification these resources are written for.