The Chromozone / Courses / IGCSE Co-ordinated Sciences / Physics / P1 Motion, forces and energy

Cambridge IGCSE Co-ordinated Sciences (0654) · Physics · Revision summary

Revision summary: P1.2 Motion

Syllabus P1.2Revision summaryCambridge IGCSE Co-ordinated Sciences (0654)
Back to the course

One screen per syllabus point: the key words, the key facts, and a 2-minute "spot the mistake" check (mark it yourself with the correction). Then a list of common exam errors and a self-check of 16 marks (Core: 11; questions marked "Extended only" are for Extended students). Type your self-check answers in the boxes and hand them in at the bottom of the page; its mark scheme opens after you hand in. It takes about 40 minutes, and you may use a calculator. Use it after the last P1.2 lesson, before the end-of-section test. Teachers: this is the page to set as homework.

Teach these first

This revision summary covers these lessons. Teach them before students start here:

P1.2 key words

Speed
The distance travelled per unit time.
Average speed
The total distance travelled divided by the total time taken.

P1.2 Speed and average speed

speed = distance ÷ time
v = st
average speed = total distance travelled ÷ total time taken
  • Rearranged: distance = speed × time; time = distance ÷ speed.
  • Units must match: m and s give m/s; km and h give km/h. To change km/h into m/s, divide by 3.6.
  • The total time includes any stops. 1 h 30 min = 1.5 h, not 1.3 h.
  • Measuring speed: distance with a tape measure (or a metre rule in the lab); time with a stopwatch or with light gates and a timer (no reaction time).

Check P1.2: spot the mistake (2 marks) 2 min

A student wrote this. Find each mistake and correct it. (2)

"A car travels 30 km in 20 minutes, so its speed is 30 × 20 = 600 km/h."

Reveal the correction
  • Speed = distance ÷ time, not distance × time (1)
  • 20 minutes = 1/3 h, so the speed is 30 ÷ (1/3) = 90 km/h (1)

P1.2 key words Extended only

Velocity
Speed in a given direction.

P1.2 Velocity Extended only

  • Velocity is a vector: it has a size and a direction. Speed is a scalar: size only.
  • Two runners at 6 m/s, one going north and one going south, have the same speed but different velocities.
  • Along a line, a minus sign can show the opposite direction: −6 m/s.

Check P1.2: spot the mistake (1 marks) Extended only 2 min

A student wrote this. Find each mistake and correct it. (1)

"A car drives round a roundabout at a steady 10 m/s, so its velocity does not change."

Reveal the correction
  • Its direction keeps changing, so its velocity changes (only its speed stays the same) (1)

P1.2 key words

At rest
Not moving: on a distance-time graph, a horizontal line.
Gradient
Change in the y-axis quantity ÷ change in time; on a distance-time graph, the speed.

P1.2 Distance-time graphs

A distance-time graph with four sectionsDistance against time. A straight line from 0 to 40 m at 10 s (constant speed), flat to 20 s (at rest), a curve getting steeper to 100 m at 30 s (accelerating), then a curve getting less steep to 140 m at 40 s (decelerating).01020304002040608010012014016010 s40 msteadyat restspeeding upslowingtime / sdistance / m
The shape tells you the motion. The triangle gives the speed in the first section: 40 m ÷ 10 s = 4.0 m/s.Graph: The Chromozone, drawn from the data
Distance-time graphs
ShapeMotion
horizontal lineat rest
straight sloping lineconstant speed (steeper = faster)
curve getting steeperaccelerating
curve getting less steepdecelerating

Speed = gradient = change in distance ÷ change in time, for a straight-line section.

Check P1.2: spot the mistake (2 marks) 2 min

A student wrote this. Find each mistake and correct it. (2)

"On a distance-time graph, a horizontal line means the object is moving at a steady speed, and a steep straight line means it is accelerating."

Reveal the correction
  • A horizontal line means it is at rest (the distance is not changing) (1)
  • A steep straight line means a high constant speed; accelerating is a curve that gets steeper (1)

P1.2 key words

Accelerating / decelerating
Speeding up / slowing down.
Acceleration Extended only
The change in velocity per unit time, in m/s².

P1.2 Acceleration

  • An object moving with increasing speed is accelerating; with decreasing speed, it is decelerating. A steady speed in a straight line means no acceleration.
  • Extended only a = Δv ÷ Δt = (v − u) ÷ t, in m/s². Rearranged: v = u + at.
  • Extended only A deceleration is a negative acceleration: slowing from 20 m/s to 8 m/s in 4 s gives a = (8 − 20) ÷ 4 = −3 m/s².

Check P1.2: spot the mistake (2 marks) 2 min

A student wrote this. Find each mistake and correct it. (2)

"A plane cruising at 250 m/s has a very large acceleration. A bike that slows from 10 m/s to 4 m/s in 3 s has an acceleration of +2 m/s."

Reveal the correction
  • A steady speed means no acceleration (zero), however fast (1)
  • Extended: a = (4 − 10) ÷ 3 = −2 m/s²: negative, and the unit is m/s² (1)

P1.2 key words

Area under a speed-time graph
The distance travelled.
Gradient of a speed-time graph Extended only
The acceleration.

P1.2 Speed-time graphs

A speed-time graphSpeed against time. A straight line from 0 to 12 m/s at 4 s, flat at 12 m/s until 10 s, then a straight line down to 0 at 16 s. The areas under the three parts are shaded: 24 m, 72 m and 36 m.02468101214160246810121424 m72 m36 mtime / sspeed / m/s
Distance = area under the line = 24 + 72 + 36 = 132 m.Graph: The Chromozone, drawn from the data
Speed-time graphs
ShapeMotion
horizontal line on the time axisat rest
horizontal line above the axisconstant speed
straight line sloping up / downaccelerating / decelerating (Extended: constant acceleration)
curveExtended: changing acceleration

Distance = area: rectangle = speed × time; triangle = ½ × base × height. Extended only Acceleration = gradient = change in speed ÷ change in time.

Check P1.2: spot the mistake (2 marks) 2 min

A student wrote this. Find each mistake and correct it. (2)

"On a speed-time graph, the distance travelled is the value you read on the y-axis at the end, and a flat line means at rest."

Reveal the correction
  • The distance is the area under the line (the y-axis gives the speed) (1)
  • A flat line above the axis means constant speed; at rest is a line along the time axis (speed zero) (1)

P1.2 key words

Air resistance
A friction force (drag) on an object moving through air; it acts against the motion.
Acceleration of free fall, g Extended only
About 9.8 m/s² near the Earth's surface, for an object falling with no air resistance.

P1.2 Falling

  • With no air resistance (a vacuum), all objects fall with the same acceleration, whatever their mass.
  • A skydiver: weight bigger than air resistance, so she speeds up; air resistance grows with speed until it equals her weight: steady speed. The parachute makes air resistance bigger than her weight: she slows down to a new, lower steady speed.
  • Extended only g ≈ 9.8 m/s²: a falling object's speed goes up by 9.8 m/s every second (v = g × t from rest). The curved start of a skydiver's speed-time graph shows changing acceleration.

Check P1.2: spot the mistake (2 marks) 2 min

A student wrote this. Find each mistake and correct it. (2)

"A skydiver falls at a steady speed because there are no forces on her. When the parachute opens, she moves upwards."

Reveal the correction
  • At a steady speed the forces are balanced: air resistance equals her weight (1)
  • When the parachute opens she slows down but still moves downwards (1)

Common misconceptions and exam errors

  1. Units: convert first (km and minutes into m and s, or into km and h); acceleration is m/s², not m/s.
  2. Average speed: total distance ÷ total time, with stops included; never the mean of two speeds.
  3. Graphs: read the y-axis label first. Flat means at rest on a distance-time graph, but constant speed on a speed-time graph.
  4. Gradient or area: gradient of distance-time = speed; area under speed-time = distance. Remember ½ for triangles.
  5. Falling: heavier objects do not fall faster in a vacuum; at a steady speed, the forces are balanced.
  6. Extended only Deceleration: v − u is negative when slowing down, so the acceleration is negative.

Self-check: P1.2 Motion (16 marks) 20 min

Answer without your notes, then hand in. The syllabus point is in brackets after each question. Show your working and give units.

S1. Define speed. (P1.2) (1)

S2. A runner completes one 400 m lap in 80 s. Calculate her average speed. (P1.2) (2)

Working
Average speed

S3. A hiker walks 3.0 km in 40 minutes, rests for 20 minutes, then walks 2.0 km in 20 minutes. Calculate her average speed for the whole hike, in km/h. (P1.2) (2)

Working
Average speed (km/h)

S4. Part of a distance-time graph is a horizontal line. Describe the motion. (P1.2) (1)

S5. A distance-time graph is a straight line from (0 s, 0 m) to (25 s, 150 m). Calculate the speed. (P1.2) (1)

Speed

S6. A car speeds up steadily from rest to 15 m/s in 10 s. Use the area under its speed-time graph to calculate how far it travels. (P1.2) (2)

Working
Distance (m)

Extended only S7. Calculate the acceleration of the car in S6. (P1.2) (1)

Acceleration

Extended only S8. A train slows from 30 m/s to 10 m/s in 5.0 s. Calculate its acceleration. (P1.2) (2)

Working
Acceleration

Extended only S9. Define velocity. (P1.2) (1)

S10. After falling for some time, a skydiver stops speeding up. Explain why. (P1.2) (1)

Extended only S11. State the acceleration of free fall near the Earth's surface, with its unit. (P1.2) (1)

S12. Part of a speed-time graph is a horizontal line above the time axis. Describe the motion. (P1.2) (1)

Mark scheme for the self-check

S1 (1)

  • The distance travelled per unit time (accept distance ÷ time) (1)

S2 (2)

  • v = 400 ÷ 80 (1)
  • = 5.0 m/s (1)

S3 (2)

  • Total distance 5.0 km and total time 80 min = 1.33 h (the rest counts) (1)
  • 5.0 ÷ 1.33 = 3.75 km/h (accept 3.8 km/h) (1)

S4 (1)

  • At rest (not moving) (1)

S5 (1)

  • 150 ÷ 25 = 6.0 m/s (1)

S6 (2)

  • Area of the triangle = ½ × 10 × 15 (1)
  • = 75 m (1)

S7 (1): Extended only

  • 15 ÷ 10 = 1.5 m/s² (1)

S8 (2): Extended only

  • a = (10 − 30) ÷ 5.0 (1)
  • = −4.0 m/s² (accept a deceleration of 4.0 m/s²) (1)

S9 (1): Extended only

  • Speed in a given direction (1)

S10 (1)

  • Air resistance has grown (with her speed) until it equals her weight, so the forces are balanced (1)

S11 (1): Extended only

  • About 9.8 m/s² (unit needed) (1)

S12 (1)

  • Constant speed (not at rest) (1)

Back to the course

Was this page useful?

Goes straight to the two people who make these pages. Please don't include students' names or other personal details.