The Chromozone / Courses / IGCSE Co-ordinated Sciences / Physics / P1.6 Energy, work and power and P1.7 Pressure
Cambridge IGCSE Co-ordinated Sciences (0654) · Physics · Revision summary
Revision summary: P1.6 Energy, work and power and P1.7 Pressure
One screen per syllabus point: the key words, the key facts, and a 2-minute "spot the mistake" check (mark it yourself with the correction). Then a list of common exam errors and a self-check of 17 marks (Core: 12; questions marked "Extended only" are for Extended students). Type your self-check answers in the boxes and hand them in at the bottom of the page; its mark scheme opens after you hand in. It takes about 45 minutes. Use it after the last lesson of the section, before the end-of-section test. Teachers: this is the page to set as homework.
Teach these first
This revision summary covers these lessons. Teach them before students start here:
- P1.6.1 Energy stores and transfers
- P1.6.1 Energy stores and transfers: the investigation
- P1.6.1 Kinetic energy (Extended only)
- P1.6.1 Gravitational potential energy (Extended only)
- P1.6.1 Conservation of energy
- P1.6.1 Conservation of energy: the investigation
- P1.6.2 Work done
- P1.6.3 Energy resources
- P1.6.3 Efficiency
- P1.6.4 Power
- P1.7 Pressure
P1.6.1 key words
- Energy store
- A place where energy is kept. Energy is measured in joules (J).
P1.6.1 Energy stores
| Store | Energy is in it when... |
|---|---|
| kinetic | an object moves |
| gravitational potential | an object is raised |
| chemical | a fuel, food or battery can react |
| elastic (strain) | an object is stretched, squashed or bent |
| nuclear | it is held in the nuclei of atoms |
| electrostatic | charges are pushed together or pulled apart |
| internal (thermal) | the particles move; hotter means more |
Check P1.6.1: spot the mistake (2 marks) 2 min
A student wrote this. Find each mistake and correct it. (2)
"A battery stores electrical energy, and a stretched spring stores kinetic energy."
Reveal the correction
- A battery has a chemical store (electricity is a way of transferring energy, not a store) (1)
- A stretched spring has an elastic (strain) store (1)
P1.6.1 key words
- Energy transfer
- Energy moving from one store to another: mechanically (a force: mechanical work), electrically (a current: electrical work), by heating, or by waves (light, infrared, sound).
P1.6.1 Energy transfers
- Describe a transfer in full: from which store, how, to which store.
- Example: "Energy is transferred from the chemical store of the battery, electrically, to the motor, then mechanically to the kinetic store of the fan."
- Transfer diagram: stores in boxes, the way the energy is transferred beside each arrow.
Check P1.6.1: spot the mistake (2 marks) 2 min
A student wrote this. Find each mistake and correct it. (2)
"Sunlight transfers energy to a solar panel by heating, and the panel transfers it to a lamp mechanically."
Reveal the correction
- Sunlight transfers energy by light (electromagnetic waves) (1)
- The panel transfers it to the lamp electrically (by an electric current) (1)
P1.6.1 key words
- Principle of conservation of energy
- Energy cannot be created or destroyed, only transferred from one store to another; the total stays the same.
- Useful / wasted energy
- Energy that goes where we want / energy that goes elsewhere, usually to the internal store of the surroundings.
P1.6.1 Conservation of energy
- Total energy in = useful energy out + wasted energy out.
- A skater on a ramp: gravitational potential store ↔ kinetic store. With friction, some energy goes to the internal store of the wheels and the air each time, so the skater never rises as high again.
- Energy that is "lost" has been transferred to the surroundings, mostly by heating and sound.
Check P1.6.1: spot the mistake (1 mark) 2 min
A student wrote this. Find each mistake and correct it. (1)
"When a bouncing ball finally stops, its energy has been used up."
Reveal the correction
- It has been transferred, by heating and sound, to the internal (thermal) store of the ball, the floor and the air; none is destroyed (1)
P1.6.1 key words Extended only
- Kinetic energy, Ek
- The energy in the kinetic store: Ek = ½mv² (J, kg, m/s).
P1.6.1 Kinetic energy Extended only
- Double the mass: double the kinetic energy. Double the speed: four times the kinetic energy.
- Rearranged: v² = 2Ek ÷ m (then take the square root); m = 2Ek ÷ v².
- Example: a 0.16 kg ball at 30 m/s: Ek = ½ × 0.16 × 30² = 72 J.
Check P1.6.1: spot the mistake (1 mark) Extended only 2 min
A student wrote this. Find each mistake and correct it. (1)
"Doubling the speed of a car doubles the energy in its kinetic store."
Reveal the correction
- It makes it four times bigger, because the speed is squared (1)
P1.6.1 key words Extended only
- Change in gravitational potential energy, ΔEp
- ΔEp = mgΔh (J, kg, N/kg, m); g = 9.8 N/kg near the Earth.
P1.6.1 Gravitational potential energy Extended only
- Δh is the change in vertical height, whatever the route.
- With no energy wasted, the decrease in ΔEp of a falling object equals its gain in Ek: use this to find a speed or a height.
- Example: a 25 kg crate lifted 1.8 m: ΔEp = 25 × 9.8 × 1.8 = 441 J.
Check P1.6.1: spot the mistake (1 mark) Extended only 2 min
A student wrote this. Find each mistake and correct it. (1)
"A 10 kg crate is pushed 5 m up a ramp to a platform 2 m high, so its gain in gravitational potential energy is 10 × 9.8 × 5 = 490 J."
Reveal the correction
- Use the vertical height, 2 m: ΔEp = 10 × 9.8 × 2 = 196 J (1)
P1.6.2 key words
- Work done
- The energy transferred when a force moves an object (or a current flows): W = Fd = ΔE (J, N, m).
P1.6.2 Work done
- d is the distance moved in the direction of the force. No movement in that direction: no work.
- Lifting at a steady speed: the force is the weight, mg, and d is the height.
- Example: a 60 N push over 2.5 m: W = 60 × 2.5 = 150 J.
Check P1.6.2: spot the mistake (1 mark) 2 min
A student wrote this. Find each mistake and correct it. (1)
"A man holding a heavy bag still at waist height does work on the bag every second he holds it."
Reveal the correction
- No work is done on the bag: it does not move (work done = force × distance moved) (1)
P1.6.3 key words
- Renewable / non-renewable
- Replaced naturally, will not run out (wind, solar, water, geothermal, biofuels) / will run out (fossil fuels, uranium).
- Boiler, turbine, generator
- Water is heated to steam; the steam (or water, or wind) spins the turbine; the turbine turns the generator.
P1.6.3 Energy resources
| Resource | Turbine and generator? | Renewable? | Reliable? |
|---|---|---|---|
| fossil fuels, biofuels, nuclear, geothermal | yes, with a boiler | fossil and nuclear no; biofuels and geothermal yes | yes |
| hydroelectric, tides, waves, wind | yes, no boiler | yes | dams and tides yes; waves and wind no |
| solar cells | no: light to electricity directly | yes | no (night, cloud) |
| solar thermal collectors | no: heats water only | yes | no (night, cloud) |
- Compare resources by renewability, availability, reliability, scale and environmental impact.
- Extended only The Sun is the main source of our energy resources, except geothermal, nuclear and tidal. Fusion releases energy in the Sun; fission releases energy in nuclear reactors.
Check P1.6.3: spot the mistake (2 marks) 2 min
A student wrote this. Find each mistake and correct it. (2)
"Wind is renewable, so it can supply electricity at any time. Solar cells use a turbine and a generator."
Reveal the correction
- Renewable is not the same as reliable: no wind means no electricity (1)
- Solar cells transfer energy from light straight to electricity, with no turbine or generator (1)
P1.6.3 key words
- Efficiency
- How much of the energy supplied is transferred usefully. (Extended) efficiency = (useful energy output ÷ total energy input) × 100% = (useful power output ÷ total power input) × 100%.
P1.6.3 Efficiency
- No device is more than 100% efficient; most waste energy by heating and sound.
- Cut waste: lubricate moving parts, insulate hot things, use LEDs.
- Extended only Example: 250 J in, 175 J useful: (175 ÷ 250) × 100% = 70%.
Check P1.6.3: spot the mistake (2 marks) 2 min
A student wrote this. Find each mistake and correct it. (2)
"A motor takes in 200 J and gives out 150 J of useful energy, so it wastes 150 J and is 133% efficient."
Reveal the correction
- It wastes 200 − 150 = 50 J (1)
- (Extended) Efficiency = (150 ÷ 200) × 100% = 75%; no device can be more than 100% efficient (1)
P1.6.4 key words
- Power
- Work done or energy transferred per unit time: P = W/t = ΔE/t (W, J, s). 1 W = 1 J/s; 1 kW = 1000 W.
P1.6.4 Power
- Work done is how much energy; power is how fast.
- Change minutes to seconds and kW to W before you calculate.
- Example: 36 000 J of work in 20 s: P = 1800 W.
Check P1.6.4: spot the mistake (2 marks) 2 min
A student wrote this. Find each mistake and correct it. (2)
"Power is the total energy a device uses. A 2 kW kettle transfers 2 J every second."
Reveal the correction
- Power is the energy transferred per unit time (how fast), not the total (1)
- A 2 kW kettle transfers 2000 J every second (1)
P1.7 key words
- Pressure
- Force per unit area: p = F/A (Pa = N/m², N, m²).
P1.7 Pressure
- Bigger force: bigger pressure. Bigger area: smaller pressure.
- Low pressure: snowshoes, wide tyres. High pressure: knives, needles, drawing pins.
- 1 m² = 10 000 cm². Example: 600 N on 0.20 m²: p = 3000 Pa.
Check P1.7: spot the mistake (1 mark) 2 min
A student wrote this. Find each mistake and correct it. (1)
"Snowshoes increase the force on the snow, so you do not sink."
Reveal the correction
- The force (your weight) is the same; snowshoes spread it over a larger area, so the pressure is smaller (1)
Common misconceptions and exam errors
- Stores and transfers: "electrical", "light", "sound" and "heat" are ways of transferring energy, not stores.
- "Energy is lost": say where it goes (the internal store of the surroundings) and how (heating, sound).
- Units: mass in kg, distance in m, time in s, power in W, area in m² for Pa.
- Weight, not mass: for lifting and for pressure, the force is mg in newtons.
- Work and power: work is how much energy; power is how fast.
- Renewable and reliable: two different ideas.
Self-check: P1.6 and P1.7 (17 marks) 20 min
Answer without your notes, then hand in. The syllabus point is in brackets after each question. Use g = 9.8 N/kg.
S1. Name the energy store of (a) a stretched rubber band and (b) a cup of hot tea. (P1.6.1) (1)
S2. A car brakes and stops. Describe the energy transfers. (P1.6.1) (2)
S3. State the principle of conservation of energy. (P1.6.1) (1)
Extended only S4. Calculate the kinetic energy of a 70 kg runner moving at 6.0 m/s. (P1.6.1) (1)
Extended only S5. A 2.0 kg bag falls 4.0 m. Ignoring air resistance, calculate its speed just before it lands. (P1.6.1) (2)
S6. A force of 250 N pushes a car 12 m. Calculate the work done. (P1.6.2) (1)
S7. Describe how a wind turbine generates electricity, and give one disadvantage of wind power. (P1.6.3) (2)
Extended only S8. Name the three energy resources that do not get their energy from the Sun. (P1.6.3) (1)
S9. Explain why an LED lamp is more efficient than a filament lamp that gives the same light. (P1.6.3) (1)
Extended only S10. A lamp is supplied with 60 J and gives out 15 J of light. Calculate its efficiency. (P1.6.3) (1)
S11. A 1.2 kW heater is switched on for 5 minutes. Calculate the energy it transfers. (P1.6.4) (2)
S12. A student weighing 720 N stands on two feet with a total area of 0.045 m² on the floor. Calculate the pressure on the floor. (P1.7) (2)
Mark scheme for the self-check
S1 (1)
- (a) Elastic (strain) and (b) internal (thermal): both needed (1)
S2 (2)
- From the kinetic store of the car, mechanically (by friction in the brakes) (1)
- By heating to the internal (thermal) store of the brakes and the surroundings (and some by sound) (1)
S3 (1)
- Energy cannot be created or destroyed, only transferred between stores (the total stays the same) (1)
S4 (1): Extended only
- ½ × 70 × 6.0² = 1260 J (1)
S5 (2): Extended only
- ΔEp = 2.0 × 9.8 × 4.0 = 78.4 J = Ek (1)
- v² = 2 × 78.4 ÷ 2.0 = 78.4, so v = 8.9 m/s (8.85) (1)
S6 (1)
- W = Fd = 250 × 12 = 3000 J (1)
S7 (2)
- The wind turns the blades (turbine), which turn a generator (1)
- Any one: unreliable (no wind, no electricity) / many turbines needed / noise or changes to the view (1)
S8 (1): Extended only
- Geothermal, nuclear and tidal (all three) (1)
S9 (1)
- The LED wastes less energy by heating, so a bigger part of the energy supplied comes out as light (1)
S10 (1): Extended only
- (15 ÷ 60) × 100% = 25% (1)
S11 (2)
- 1.2 kW = 1200 W and 5 minutes = 300 s (1)
- ΔE = P × t = 1200 × 300 = 360 000 J (1)
S12 (2)
- p = F ÷ A = 720 ÷ 0.045 (1)
- = 16 000 Pa (1)