The Chromozone / IAL Biology / Unit 1 / Topic 2

Topic 2.6 (part 1): Amino acids, peptide bonds and polypeptides

Spec 2.6Self study

Share this page with your students: it is all they will see. Students who have joined your class can also open it on their own once the class has moved past this lesson.

Starter (4 marks) 5 min

Answer these three recap questions in your notebook:

  1. Describe how a white blood cell takes in a bacterium by phagocytosis. (2.5) (2)
  2. A red blood cell is placed in a solution with a lower water potential than its cytoplasm. State what happens to the cell. (2.4) (1)
  3. 50 α-glucose molecules join to make one unbranched amylose chain. Calculate how many water molecules are released. (1.4) (1)

Words you will need today

  • Monomer: a small molecule that can join to others like it to make a polymer.
  • Condensation reaction: two molecules join by a new covalent bond, and a molecule of water is released.
  • Hydrolysis: a covalent bond is broken by adding a molecule of water.
Reveal the starter answers

Question 1 (2)

  • The cell surface membrane reaches round the bacterium as pseudopodia (1)
  • The membrane fuses and pinches off, enclosing the bacterium in a {vesicle / vacuole} inside the cell (1)

Question 2 (1)

  • Water leaves the cell by osmosis, so the cell shrinks and its surface becomes crinkled (crenated) (1)
  • DO NOT ACCEPT plasmolysis: a red blood cell has no cell wall

Question 3 (1)

  • 49: a chain of n monomers has n − 1 glycosidic bonds, and one water molecule is released for each bond formed (1)
  • ACCEPT 50 − 1 or 49 for the mark; DO NOT ACCEPT 50

The same n − 1 rule works for amino acids today.

Key words: amino acids

Monomer
A small molecule that can join to others like it to make a polymer.
Amino acid
The monomer that polypeptides and proteins are built from. Organisms use 20 different amino acids in their proteins.
Amino group (−NH2)
A nitrogen atom bonded to two hydrogen atoms. It is basic: it can accept H+.
Carboxyl group (−COOH)
A carbon atom with a double bond to one oxygen atom and a single bond to an −OH group. It is acidic: it can release H+.
R group (side chain)
The part of an amino acid that is different in each one.

The basic structure of an amino acid

Amino acids are the monomers that polypeptides and proteins are built from. Living organisms use 20 different amino acids to make their proteins: the 20 coded for by the genetic code. Many other amino acids exist in nature, such as ornithine, which the liver makes while it produces urea, but they are not built into proteins.

Elements: every amino acid contains carbon, hydrogen, oxygen and nitrogen. Two of the 20, cysteine and methionine, also have a sulfur atom in their R group. Carbohydrates and triglycerides contain only carbon, hydrogen and oxygen.

Four groups around one carbon atom

Every amino acid has the same basic structure: a central carbon atom (the α-carbon) joined by single covalent bonds to four groups.

Displayed formula of an amino acid. A central carbon atom, labelled alpha, has four single bonds: to an R group above, a hydrogen atom below, an amino group on the left (a nitrogen atom bonded to two hydrogen atoms) and a carboxyl group on the right (a carbon atom with a double bond to one oxygen atom and a single bond to an OH group).
The general structure of an amino acid: the central carbon (Cα, orange) carries an amino group, a carboxyl group, a hydrogen atom and an R group (pink)Image: Ben Mills (Benjah-bmm27), public domain, via Wikimedia Commons
  • An amino group, −NH2: a nitrogen atom bonded to two hydrogen atoms. It is basic: it can accept a hydrogen ion (H+).
  • A carboxyl group, −COOH: a carbon atom with a double bond to one oxygen atom and a single bond to an −OH group. It is acidic: it can release H+.
  • A hydrogen atom, −H.
  • An R group (side chain): the part that is different in each amino acid. In glycine, R is just a hydrogen atom, so glycine has two hydrogen atoms on its central carbon. In alanine, R is a methyl group, −CH3.

For the exam: you do not need to learn the structures of particular amino acids. Learn the general structure, and be ready to pick out the R group in any amino acid you are given.

The R group is the only part that changes from one amino acid to the next, so it gives each of the 20 amino acids its own properties. Think of keys cut from the same blank: the blank is the same for every key, and the cuts make each key different. Some R groups are polar and some are non-polar, so they behave differently in water. This matters later, when a chain of amino acids folds into a protein.

Mini whiteboard round: find the R group 4 min

Show each formula on the board. Students write the R group, or "not an amino acid" with the reason, and hold up their whiteboards together.

  1. H2N−CH(CH3)−COOH
  2. H2N−CH2−COOH
  3. H2N−CH(CH2OH)−COOH
  4. H2N−CH(CH2SH)−COOH
  5. H2N−CH2−CH2−OH

Tip: find the carbon atom that carries both the −NH2 and the −COOH. Whatever else is joined to it, apart from one H, is the R group.

Reveal the whiteboard answers
  1. The R group is −CH3. (This is alanine.)
  2. The R group is −H, so the central carbon carries two hydrogen atoms. (This is glycine.)
  3. The R group is −CH2OH. (This is serine.)
  4. The R group is −CH2SH, which contains sulfur. (This is cysteine.)
  5. This is not an amino acid, because it has an amino group but no carboxyl group.

The names are for interest only: you never need to recall the structure of a particular amino acid.

Key words: peptide bonds

Peptide bond
The covalent bond between the carbon atom of the carboxyl group of one amino acid and the nitrogen atom of the amino group of the next. Often written −CO−NH−.
Dipeptide
Two amino acids joined by one peptide bond.
Polypeptide
An unbranched chain of many amino acids joined by peptide bonds. A protein is one or more polypeptides folded into a particular three-dimensional shape.
Primary structure
The sequence of amino acids in a polypeptide chain, which also fixes how many there are.
Condensation reaction
Two molecules join by a new covalent bond, and a molecule of water is released.
Hydrolysis
A covalent bond is broken by adding a molecule of water.

Peptide bonds: condensation and hydrolysis

Amino acids join into a polypeptide one at a time. The order they join in is the primary structure, and it is set by the base sequence of the gene that codes for the polypeptide (2.12).

Condensation: making a peptide bond

  1. The −OH is removed from the carboxyl group of one amino acid.
  2. An −H is removed from the amino group of the other amino acid.
  3. Together they leave as one molecule of water, and a peptide bond forms between the carbon atom and the nitrogen atom.
amino acid + amino acid → dipeptide + H2O

In cells, ribosomes join amino acids together in this way during translation (2.13).

Two amino acids side by side, labelled amino acid 1 and amino acid 2, with side chains R1 and R2. The OH of the carboxyl group of amino acid 1 and one H of the amino group of amino acid 2 are highlighted together. An arrow points down to a dipeptide, in which the carboxyl carbon of the first amino acid is now bonded to the nitrogen of the second, labelled peptide bond, and to a separate water molecule. The amino end of the first amino acid is labelled N-terminus and its carboxyl end C-terminus.
Condensation: the −OH of one carboxyl group and an −H of the next amino group leave as a molecule of water, and a peptide bond forms between C and N. Nitrogen is purple here (blue in most model kits)Image: Yassine Mrabet, public domain, via Wikimedia Commons

What the R groups do: nothing, in this reaction. The R groups take no part in forming peptide bonds; they stick out from the backbone of the chain. Later they interact with each other, through hydrogen bonds, ionic bonds, disulfide bridges and hydrophobic interactions, and this folds the polypeptide into its three-dimensional shape (part 2, the next lesson).

Hydrolysis: breaking a peptide bond

A molecule of water is added across the peptide bond. The bond between C and N breaks, the −OH goes back onto the carboxyl group and the −H back onto the amino group, so two complete amino acids are released. In digestion, protease enzymes catalyse this reaction.

dipeptide + H2O → amino acid + amino acid

When two amino acids join, the -OH from one carboxyl group and an -H from the next amino group leave together as a molecule of water. The carbon and the nitrogen that are left form the peptide bond. This is the same kind of reaction that made a glycosidic bond in a carbohydrate and an ester bond in a triglyceride. The R groups stick out from the backbone and take no part in it. To break the bond, water is added in hydrolysis, and this is what protease enzymes do when we digest protein.

Task 1: build amino acids and a dipeptide 12 min

Work in pairs with a molecular model kit. This is a classroom modelling activity, not one of Pearson's practicals: the recommended practical for spec point 2.6 is estimating protein concentration with biuret reagent and colour standards, which has its own two practical lessons.

Colour key. Most kits use these colours, but check the key that comes with yours.

ColourAtomHoles (= bonds)
BlackCarbon (C)4
BlueNitrogen (N)3 (in an uncharged −NH2 group)
RedOxygen (O)2
WhiteHydrogen (H)1
An open plastic box of molecular model parts in separate compartments: blue balls, white balls, black balls, red balls, green balls, a few yellow balls, and grey plastic links.
A molecular model kit: black carbon, white hydrogen, red oxygen and blue nitrogen atoms, with grey links for the bonds. The green and yellow atoms are other elements, which you won't need todayImage: Sonia, CC BY 3.0, via Wikimedia Commons

Use one rigid link for each single bond and two flexible links for the C=O double bond.

  1. Build glycine (R = −H): take a black carbon atom for the centre. Attach:
    • an amino group (a blue N carrying two white H)
    • a carboxyl group (a black C joined by two flexible links to one red O, and by a single link to a second red O that carries a white H)
    • one white H
    • a second white H as the R group.
  2. Build alanine (R = −CH3): build a second amino acid in the same way, but swap the R-group hydrogen for a methyl group (a black C carrying three white H).
  3. Condense them into a dipeptide:
    • take the −OH (red + white) off glycine's carboxyl group and one −H (white) off alanine's amino group
    • join these three atoms into a water molecule
    • link glycine's carboxyl carbon to alanine's amino nitrogen: that link is the peptide bond.
  4. Make a chain: join your dipeptide to the next pair's dipeptide by another condensation, to make a chain of four amino acids. Keep every water molecule you make on the desk.
Ball-and-stick models of two glycine molecules side by side. Carbon atoms are black, nitrogen blue, oxygen red and hydrogen white. Each molecule has an NH2 group, a CH2 group and a COOH group, with a double bond to one of the oxygen atoms.Ball-and-stick model of the dipeptide made from the two glycine molecules. The carboxyl carbon of the first glycine is bonded to the nitrogen of the second, which keeps one hydrogen atom. A separate water molecule, one red oxygen and two white hydrogens, sits below the dipeptide.
Two glycine molecules (top), then the dipeptide and the water molecule released when they condense (below). Most kits use the same colours: carbon black, hydrogen white, oxygen red, nitrogen blueImage: Ben Mills (Benjah-bmm27), top and bottom, public domain, via Wikimedia Commons

Questions (record them in your lab book)

  1. Count the black, white, red and blue atoms in your glycine-alanine dipeptide and write its molecular formula. Explain why the formula is not simply glycine (C2H5NO2) + alanine (C3H7NO2).
  2. Look at the two ends of your dipeptide. Name the group that is free at each end, and explain why the chain can be made longer.
  3. Silk is mostly fibroin, a fibrous protein rich in glycine, alanine and serine. A dipeptide is made of glycine (R = −H) and serine (R = −CH2OH), with glycine's carboxyl group bonded to serine's amino group. Write an equation, showing the structures, for the hydrolysis of this dipeptide into its two amino acids.
  4. State how many peptide bonds hold your chain of four amino acids together, and how many water molecules were made in building it.
Reveal the answers

(a) Molecular formula

  • Glycine + alanine = C5H12N2O4; the dipeptide is C5H10N2O3 (5 black, 10 white, 2 blue, 3 red)
  • Two hydrogen atoms and one oxygen atom left as a molecule of water in the condensation reaction
  • ACCEPT H2O lost in the working

(b) The two ends

  • One end has a free amino group (−NH2, the N-terminus) and the other a free carboxyl group (−COOH, the C-terminus)
  • Either free group can take part in another condensation reaction with a new amino acid, so the chain can keep getting longer

(c) Hydrolysis equation

H2N−CH2−CO−NH−CH(CH2OH)−COOH + H2O
→
H2N−CH2−COOH + H2N−CH(CH2OH)−COOH
glycine-serine dipeptide + water → glycine + serine
  • Water shown on the left of the arrow (or over it), and the bond broken is the peptide bond between C and N
  • Glycine correct, with the −OH back on its carboxyl group: H2N−CH2−COOH
  • Serine correct, with the H back on its amino group: H2N−CH(CH2OH)−COOH
  • ACCEPT fully displayed formulae, with every bond drawn, as long as each carbon has four bonds and each nitrogen three

(d) The chain of four

  • 3 peptide bonds and 3 water molecules: one fewer than the number of amino acids
  • NB both numbers are needed for the mark

Common misconceptions and exam errors

  1. A carbon atom with five bonds. Before finishing any drawn structure, count the bonds on every atom: carbon 4, nitrogen 3 (in −NH2), oxygen 2, hydrogen 1. The usual slips are a central carbon with five bonds and an amino group with three hydrogens.
  2. "The R groups form the peptide bond." Peptide bonds join the carboxyl group of one amino acid to the amino group of the next, along the backbone. R groups are never involved. When the chain folds, they form hydrogen bonds, ionic bonds, disulfide bridges and hydrophobic interactions instead.
  3. Using n − 1 for a protein with several chains. Each chain has one fewer peptide bond than it has amino acids. For a protein with c chains and n amino acids in all, there are n − c peptide bonds: haemoglobin has 574 amino acids in 4 chains, so 570 peptide bonds, not 573.

Exam-style questions (7 marks) 8 min

1. Which element is present in every amino acid but is not present in glucose? (1)

  1. carbon
  2. nitrogen
  3. phosphorus
  4. sulfur

2. A polypeptide made of one chain is completely hydrolysed to amino acids. 300 molecules of water are used. How many amino acids were in the chain? (1)

  1. 299
  2. 300
  3. 301
  4. 600

3. Which statement about the R groups of the amino acids in a polypeptide is correct? (1)

  1. They form the peptide bonds between amino acids.
  2. They are the same in every amino acid.
  3. They take no part in forming peptide bonds.
  4. They are removed as water when a peptide bond forms.

4. The hormone glucagon is a single polypeptide chain of 29 amino acids. (4 marks in total)

  1. State the number of peptide bonds in one molecule of glucagon. (1)
  2. Describe how a peptide bond forms between two amino acids when glucagon is made. (3)
Reveal the mark scheme

Question 1 (1)

  • B (nitrogen) (1)

Why not the others: glucose also contains carbon; phosphorus is found in phospholipids and nucleotides, not in amino acids; only two amino acids, cysteine and methionine, contain sulfur.

Question 2 (1)

  • C (301) (1)

Why: one water molecule is used for each peptide bond broken, and a chain of n amino acids has n − 1 bonds, so 300 bonds means 301 amino acids.

Question 3 (1)

  • C (they take no part in forming peptide bonds) (1)

Why: peptide bonds form between the carboxyl group of one amino acid and the amino group of the next. The R groups stick out from the chain.

Question 4(a) (1)

  • 28 (1)

Question 4(b) (3)

  • A condensation reaction (1)
  • Between the carboxyl group (−COOH) of one amino acid and the amino group (−NH2) of the next (1)
  • The −OH from the carboxyl group and an −H from the amino group are removed as a molecule of water (1)
  • A covalent bond forms between the carbon atom and the nitrogen atom (−CO−NH−) (1)
  • The R groups are not involved (1)
  • It happens on ribosomes, during translation (1)
  • DO NOT ACCEPT the R groups join together, or water is added (that describes hydrolysis)
  • Max 3

Stretch: peptide bonds in a blood clot (6 marks)

When a blood vessel is damaged, the enzyme thrombin turns the soluble plasma protein fibrinogen into fibrin (1.11). Thrombin does this by hydrolysing four particular peptide bonds in each fibrinogen molecule. This releases four short peptides called fibrinopeptides: two of 16 amino acids and two of 14 amino acids. What is left is a fibrin molecule, which joins with other fibrin molecules to form the fibres of the clot.

Use these values: Mr of fibrinogen = 340,000; mean Mr of a free amino acid = 128; Mr of water = 18.

  1. State how many molecules of water are used when one fibrinogen molecule is converted to a fibrin molecule. (1)
  2. Calculate the total Mr of the four fibrinopeptides released from one fibrinogen molecule. (3)
  3. Calculate the Mr of the fibrin molecule, and explain why it is not simply 340,000 minus your answer to (b). (2)
Reveal the stretch answer

(a) Water used (1)

  • 4: one molecule of water is used for each peptide bond hydrolysed (1)

(b) Mass of the fibrinopeptides (3)

  • Uses one fewer water molecule than amino acids for each peptide: 15 for a 16-amino-acid peptide and 13 for a 14-amino-acid peptide (1)
  • 16 × 128 − 15 × 18 = 2,048 − 270 = 1,778 and 14 × 128 − 13 × 18 = 1,792 − 234 = 1,558 (1)
  • Total = (2 × 1,778) + (2 × 1,558) = 3,556 + 3,116 = 6,672 (1)
  • ALLOW ecf for the total from a wrong value in the second line

(c) Mass of the fibrin molecule (2)

  • 340,000 + (4 × 18) − 6,672 = 333,400 (1)
  • Hydrolysis adds a molecule of water across each peptide bond broken: the −H and −OH stay on the products, so together the products are 4 × 18 = 72 heavier than the fibrinogen they came from (1)

Checklist: by the end of this lesson I can

  • Draw the general structure of an amino acid and label the amino group, the carboxyl group, the hydrogen atom and the R group around the central carbon.
  • Build amino acids with a model kit and show how a molecule of water is removed when a peptide bond forms.
  • Write and annotate equations for making a dipeptide (condensation) and splitting it (hydrolysis).
  • Count the peptide bonds and water molecules in a polypeptide (n − 1 for one chain, n − c for c chains) and estimate its relative molecular mass.

RAG self-assessment

  • Red: I need help drawing an amino acid, or showing where the water comes from when a peptide bond forms.
  • Amber: I can draw the structures and describe condensation and hydrolysis, but I still slip up on the bond counts or the Mr calculation.
  • Green: I'm confident drawing amino acids and dipeptides, explaining condensation and hydrolysis, and doing every calculation, including proteins with more than one chain.

Past paper practice

Real exam questions on spec point 2.6, part 1: amino acids, peptide bonds and primary structure. Each link opens the paper on Pearson's own website, where past papers are free to download. Find the question number, try it, then check the mark scheme.

  • June 2022 · WBI11/01 · Q5(a)(ii)3 marks Draw the full structure of the amino acid cysteine when you are given only its R group. Question paperMark scheme
  • October 2020 · WBI11/01 · Q17 marks Complete a short account of primary structure and how peptide bonds form, then match the bond types that hold secondary and 3D structure. Question paperMark scheme

Papers and mark schemes © Pearson Education Ltd, hosted by Pearson. We only point to them.

If you have time (10 marks)

Exam-style questions for when you finish early: about 10 minutes.

1. Insulin is a hormone made of two polypeptide chains. The A chain has 21 amino acids and the B chain has 30 amino acids.

  1. State the number of water molecules released when the A chain is made from free amino acids. (1)
  2. Calculate the relative molecular mass (Mr) of the A chain. Use a mean Mr of 128 for a free amino acid and 18 for water. (2)
  3. When insulin is swallowed, enzymes in the gut break its peptide bonds. Name this type of reaction and state the molecule it uses. (1)

2. The amino acid methionine has the R group −CH2−CH2−S−CH3. It can join to glycine to make a dipeptide.

  1. Name the element in methionine, other than carbon, hydrogen, oxygen and nitrogen. (1)
  2. A student said that the sulfur atom forms the peptide bond. Explain why the student is wrong. (2)

3. An antibody molecule contains 4 polypeptide chains and 1320 amino acids in total.

  1. Calculate the number of peptide bonds in one antibody molecule. (1)
  2. A student worked out 1319 peptide bonds. Explain the mistake. (2)
Reveal the mark scheme

Question 1(a) (1)

  • 20 (1)
  • DO NOT ACCEPT 21: 21 amino acids make 20 peptide bonds, and one water molecule is released for each bond

Question 1(b) (2)

  • 21 × 128 − 20 × 18 = 2688 − 360 (1)
  • 2328 (1)
  • ACCEPT a correct answer with no working (full marks)

Question 1(c) (1)

  • Hydrolysis, using water (1)
  • NB both the reaction and the molecule are needed

Question 2(a) (1)

  • Sulfur (1)

Question 2(b) (2)

  • The peptide bond forms between the carbon of the carboxyl group of one amino acid and the nitrogen of the amino group of the next (1)
  • The R group takes no part in forming the peptide bond: it sticks out from the backbone of the chain (1)
  • DO NOT ACCEPT R groups form the peptide bond

Question 3(a) (1)

  • 1316 (1)
  • NB 1320 − 4 = 1316

Question 3(b) (2)

  • The student used n − 1, which works for a single chain only (1)
  • Each chain has one fewer peptide bond than it has amino acids, so the number of chains (4) must be subtracted, not 1 (1)

Was this page useful?

Goes straight to the two people who make these pages. Please don't include students' names or other personal details.